Analytical Lab

Teledyne MEC's experienced personnel operate a fully equipped analytical laboratory, which includes capabilities such as atomic absorption spectroscopy (AAS), electrographic (EG) spot reaction testing, X-ray fluoroscopy, and X-ray metallography.		  

Materials Verification/Identification

Metals:

  • Titanium, Molybdenum, Nickel, Tantalum - XRF, AAS
  • Molybdenum, Nickel, Platinum, Tungsten, Rhenium - AAS
  • Iron, Copper - EG

Alloys:

  • Braze Alloys - AAS and XRF
  • Copper/Nickel Alloys - EG, AAS, and Combustion Analysis
  • Stainless Steel - EG and Combustion Analysis

Process/System Capability Verification

Teledyne MEC's in-house Analytical Laboratory also provides several process/system capability services:

  • Plating bath and cleaning solution chemical analysis
  • Ceramic integrity via dye check and specific gravity
  • Metalizing formulation
  • Waste Water analysis
 
 
Specifications Subject To Change Without Notice
For additional information, contact:
TELEDYNE MEC
VACUUM ELECTRONICS
Teledyne MEC TWTs are controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. A few model numbers, as so identified, require a U.S. Department of Commerce Export License. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State.
Home | ISO 9001 | Terms of Use | Site Map | Contact Us

Teledyne MEC -- Vacuum Electronics
11361 Sunrise Park Drive, Rancho Cordova, California 95742
Telephone: 916.638.3344 | Fax: 916.636.7453
 
Copyright © 2007 Teledyne Technologies Incorporated. All rights reserved.